SS BCC Tile Bond Tile Grout 1Kg

SS BCC Tile Bond Tile Grout is a high-performance, polymerised, unsanded cement-based tile joint filler engineered to provide a clean, smooth, and seamless aesthetic between installed tiles and natural stones. Specially formulated for narrow joints (1mm to 4mm), its ultra-fine texture glides effortlessly into tight gaps without scratching delicate tile surfaces, making it ideal for polished vitrified tiles, ceramic wall tiles, marble, and decorative mosaics.
Fortified with advanced waterproofing polymer additives, Tile Bond Grout creates a dense, low-permeability barrier that actively resists water ingress, moisture migration, and dampness behind the tiles. This built-in waterproofing protection prevents efflorescence, mold, and mildew growth, ensuring a hygienic and low-maintenance surface over time.
The single-component, ready-to-use factory blend ensures consistent quality and color uniformity across the entire installation area—simply mix with clean water on-site. Engineered with elevated cohesive strength and flexibility, it expands and contracts without cracking, shrinking, or chalking under temperature variations. Whether specified for wet areas like bathrooms, shower enclosures, and kitchens, or high-traffic residential and commercial floors, SS BCC Tile Bond Tile Grout guarantees maximum structural integrity and long-lasting aesthetic appeal.

Product Shelf Life Warranty: Typically guaranteed for 12 months from the date of manufacturing, provided the bag remains unopened, undamaged, and stored in a cool, dry place off the ground (away from direct moisture and humidity).
Performance Guarantee: The manufacturer guarantees product performance (adhesion and tensile strength) only when mixed, prepared, and applied strictly in accordance with the technical specifications and surface preparation instructions.
Exclusions from Warranty:
Application on structurally unstable, vibrating, or shifting substrates.
Incorrect water-to-powder mixing ratios or improper slaking/mixing procedures.
Exposure to moisture before the 24-hour initial curing period is complete.
Improper storage resulting in lump formation or water damage inside the bag prior to use.

1. Where should unsanded tile grout be used?
Unsanded cement-based grout is designed for narrow tile joints (typically 1 mm to 4 mm wide) on both walls and floors. Because it contains no sand aggregates, it easily fills slim gaps without scratching delicate tile finishes like polished ceramics or glazed vitrified tiles.
2. Is Tile Bond Tile Grout waterproof?
Yes, it is formulated with built-in waterproofing polymer additives that significantly lower water absorption, preventing moisture seepage into the tile bed beneath.
3. How do I prepare and mix the tile grout?
Add clean water into a clean mixing container, then slowly add the grout powder while stirring until a uniform, creamy paste is formed. Allow the mixture to slake for 3–5 minutes, re-stir briefy, and apply with a rubber grout float within its working pot life.
4. When can I wipe off excess grout from the tiles?
After filling the joints, wait approximately 15 to 20 minutes (until the grout starts to firm up slightly in the joint), then clean excess grout off the tile surface using a damp sponge in diagonal strokes. Avoid using excessive water during cleanup to prevent wash-out of the joint filler.